<PLACE ORDER HERE> 

[Home]  [Electric Scooters]  [Electric Bikes]  [Power Kits]
[Parts & Accessories]  [Dynamometer Tests]

                                       New items added! Please REFRESH this page!

INDEX: Click Below

NEW! USPD Heat Sink Assembly for MAC
Rear
Basket for Currie Scooters
(Phat-E">



<PLACE ORDER HERE> 

[Home]  [Electric Scooters]  [Electric Bikes]  [Power Kits]
[Parts & Accessories]  [Dynamometer Tests]

                                       New items added! Please REFRESH this page!

INDEX: Click Below

NEW! USPD Heat Sink Assembly for MAC
Rear
Basket for Currie Scooters
(Phat-E">



<PLACE ORDER HERE> 

[Home]  [Electric Scooters]  [Electric Bikes]  [Power Kits]
[Parts & Accessories]  [Dynamometer Tests]

                                       New items added! Please REFRESH this page!

INDEX: Click Below

NEW! USPD Heat Sink Assembly for MAC
Rear
Basket for Currie Scooters
(Phat-E">



<PLACE ORDER HERE> 

[Home]  [Electric Scooters]  [Electric Bikes]  [Power Kits]
[Parts & Accessories]  [Dynamometer Tests]

                                       New items added! Please REFRESH this page!

INDEX: Click Below

NEW! USPD Heat Sink Assembly for MAC
Rear
Basket for Currie Scooters
(Phat-E, Phantom, Flyer)
Upgrade Your Currie Brakes Now! (Phat-E, Phantom, Flyer, Scoot-e)
Multi-Function Speedometer (Phat-E, Phantom, Flyer, Zappy, Hot Scoot)) 
High Quality Street Tire (Phat-E, Phantom, Flyer) 
Anti-Squeal/Anti Fade
Zappy "e-Brake"
"No Flats" Zappy/City Bug Tires! 
EXTEND YOUR RANGE with a Custom Battery Box! 
Currie Scooter Fender Extensions
Hot Scoot Front Brake 
Adjustable Hot Scoot
Motor Mount and Support 
Rack Pack Carrier 
Speed Gearing
for Currie Scooters 
Upgrade Old Currie and Lashout Bike Drives


UPGRADE YOUR Currie BRAKES NOW!
(Phat-E, Phantom, Flyer, Scoot-e)


Shimano "Acera" MTB V-Brake

V-Brake.jpg (77826 bytes) 
(Shimano Acera kit installed)

                               Click pix (use browser "back" to return)

This kit provides all the materials and instructions to upgrade those "so-so" front brakes on all Currie scooters to the more powerful MTB V-brake found on most bikes today. Get faster stopping with far less effort after installing this high leverage braking system!

  What you get!

Chrome plated steel adapter plate
Shimano  MTB V-Brake assembly w/long pads
Cable "noodle" and boot
SS fork clamps
Inner and outer Teflon coated cables
pre-cut to proper length
Terminations and cable ends
wire ties and instructions

      **This kit is designed specifically for alloy rim, spoke wheel Currie scooters. 

           Sorry. No longer available.
          

See other EVdeals custom Currie products in the Parts and Accessories section! 

   
     
BACK TO TOP                                                            <PLACE ORDER HERE>


                   Multi-Function Speedometer   
      
   For all Currie, Zap, Badsey, and many other scooters

                       (Click pix to enlarge, use browser "back" to return)

MuleHBsetup.jpg (21653 bytes)   SpeedoSensor.jpg (35967 bytes)   SpeedoFrame.jpg (37510 bytes)   SpeedoHead.jpg (22950 bytes)
"Mule" loaded with Mod     Speedometer sensor        Custom sensor cable          Model 15  available
15 speedometer, BRT-3     located  on "flat" of            length for perfect fit.          with installation kit.
LED,Tektro brake levers    fork.  Custom molded                             
   and Magura throttle.           pad for single tie.

  Features:                         Functions:                           
  Model15               
 
* Speed displayed in                                                                    * Speed                                                                                 
  ALL functions                                                                             * Max speed                                                       
* Auto start/stop                                                                           * Average speed                                    
* Automatic power saver                                                            * Trip distance (odometer)                                        
* Bold dual display                                                                        * Total distance (cumulative)                                      
* PosiClick buttons                                                                      * Riding time                                           
* Water resistant                                                                          * Km/hr and Mi/hr selectable                           
         
* Easy installation                                                                                                     

                                           Custom Model 15 $37.95      
                                                                                                 (Specify scooter)                               

                                                                                  $27.95  (Stock factory model)                         
                                                                                                        

                                                                           <PLACE ORDER HERE>

         
BACK TO TOP


HIGH QUALITY STREET TIRE FOR PHAT-E, Flyer,   PHANTOM!  Decreased rolling resistance, increased
                                 TRACTION!
                                

  
                            

     
Made by Cheng Shin Tire, this high quality street tire will improve safely and speed over 
your flimsy stock tires! Firm bead, and Nylon cord make for a stable ride on hard 
paved surfaces.  This is an exact fit replacement for the Currie 12-1/2" x 2-1/4" tire. 
Inflates to 36 PSI. Gray rubber, with C-623 pattern.$17.99 ea. (tube $3.99 ea.)

See other EVdeals custom Currie products in the Parts and Accessories section! 

                 
<PLACE ORDER HERE>

BACK TO TOP            


Anti-Squeal/Anti Fade Zappy "e-Brake"

Mvc-001s.jpg (27254 bytes) The e-Brake kit consists of a complete brake band assembly and modified drum. The secret of the e-Brake's effectiveness is a dense, heat conductive "proprietary" material filling the normally hollow interior of the steel brake drum. This material is anchored firmly within the drum body by encapsulated steel and brass hardware. Heat is conducted quickly away from the surface of the drum during braking, thereby greatly reducing brake fade. At the same time, the high density filling material "damps" out the tendency of the drum to "ring", resulting in quieter stops.

The e-Brake has been undergoing field testing for a number of months by 3 members of the eGroups Zappy List, as well as by myself at my shop.  All indications are that the product works! In every case to date, great improvements in braking have been reported. However, I will make NO CLAIMS for its performance. The individuals involved in the field testing are free to express their opinions to anyone interested. I fully expect them to report to Zappy at eGroups when and if they so desire.

Please read the "Disclaimer" carefully. e-Brake kit is $39. 

                        <PLACE ORDER HERE>
BACK TO TOP   


                                                                                          

"No Flats" Zappy/City Bug Tires!

Urethane-8.jpg (19498 bytes)Great Cheng Shin tires for the commuter. Gray, standard tread. Fit Zappy and City Bug scooters. Never another flat. The urethane inserts in the tires eliminate flats, tire pressure hassles, and range robbing tire drag. Sold only in sets. $29.95 each 
BACK TO TOP
                                                     
<PLACE ORDER HERE>


EXTEND YOUR RANGE!

Oversized Battery Boxes for
Currie Phat-E, Flyer, Phantom!

Fits all Currie scooters except Scoot-e.

BatBox3.jpg (42772 bytes)          BatBox1.jpg (54677 bytes)         BatBox5.jpg (43964 bytes)

Custom made using computer controlled plasma torch cutter. Designed for 2 Hawker G13EP
batteries. Your existing pilot light, charger port, on/off switch, and cable to motor fit directly
into this unit.  Many new units available for 36V & 48V!   Click here for DETAILS!

See other EVdeals custom Currie products in the Parts and Accessories section! 

BACK TO TOP


 

 

Rear Basket for Currie Scooters
(Phat-e, Flyer, Phantom)

                                 Basket4.jpg (74271 bytes)        Basket5.jpg (71661 bytes)                      
                                                      (click for large view. Back to return)

Nice size black wire basket mounts on all Currie scooters with metal decks. 
Aluminum alloy mounting assembly attaches to scooter deck with two stainless 
self tapping screws. (provided) "Wrap around" basket mount can be removed/ reinstalled in less than 1 minute! Great for carrying that charger and goodies!

Shipped fully assembled for $34.95
(Requires two 1/8th inch holes to be drilled) 

See other EVdeals custom Currie products in the Parts and Accessories section! 

BACK TO TOP 


Hot Scoot Front Brake

The following pictures show detail of a modified Badsey Hot Scoot with a prototype front wheel drum brake. This system utilizes a Hot Scoot rear wheel assembly installed on a modified front steering fork. Initial tests indicate improved braking, particularly on downhill runs.  Under downhill conditions, using the rear brake alone can cause wheel lockup. By relying more heavily on the front brake, rear wheel lockup can be reduced or eliminated. There has been no indication of unusual stability or handling problems encountered during early testing.

FrontBrake1.jpg (44152 bytes) FrontBrake2.jpg (47668 bytes) FrontBrake3.jpg (54164 bytes) 

FrontBrake4.jpg (69389 bytes) FrontBrake6.jpg (71740 bytes) FrontBrake5.jpg (78260 bytes)

Note that the rear brake lever has been shifted to the right side of the bar, and the new front brake lever is on the left, a more standard bicycle convention. If testing indicates a safe and reliable product, this modification may be made available in the future as a kit.
 
Pricing and availability of this kit has not been determined

BACK TO TOP  



 

        Currie Scooter Fender Extensions
                   and Mud/Rain Guards

The rear fender extension (rain and mud guard) is designed to extend the rear fender of all "metal deck" Currie scooters to a point directly above the rear-most edge of the tire. This extension will prevent water, mud, and other nasty stuff from soaking the back of your clothing when you ride in less than favorable conditions!

***Fender extensions are fabricated from 1/8" aluminum alloy stock. This is the same material from which the deck is made! You can lift the scooter by the rear fender as usual without fear of damage! Installation requires the drilling of 2 holes in the original fender. All 4 mounting holes in the extension are pre-cut, and hardware is supplied.

The mud guard is made from .080 aluminum alloy and is rolled and shaped to fit the contour of all Currie frames. Mounting is accomplished with 4 small #6 self threading screws. A hole must be drilled at each of the four attachment points. The holes are made with a #31 drill. (a 1/8th" bit can be substituted) Once the self threading screws are installed, they may be removed and replaced as often as desired, since they produced threads in the tubing wall.   



JogDownFender.jpg (52378 bytes)  JogUpFender2.jpg (55808 bytes)  Fender&BRT.jpg (44323 bytes)  
    
Fender #1  $21.95        Fender #2   $21.95        Fender  # 3  $34.95
Model 1 "jogs" downward to   Model 2 "Jogs" upward for        Model 3 includes an tail      
allow for an EVdeals basket   those who prefer the look.       light bracket and BRT-5 LED        
kit bracket to be installed if     The EVdeals fender basket      light! Quick release clip allows 
both options are chosen.       kit will not work with this unit.   instant removal if you desire.


Mudguard1.jpg (66323 bytes)                             FenderExtMudGuard1.jpg (58891 bytes) 
 
Mud Guard #1 $14.95                     Mud guard & Fender # 3
0.80 Aluminum mud guard is                           Mud guard and rear fender
formed and pre-drilled to fit                            extension installed on Currie Flyer.
all Currie scooters. Installation
takes 10 minutes. Self taping
screws included. 

ALL FENDERS AVAILABLE AT 1/2 PRICE IN THE "YARD SALE" SECTION!

 

ACK TO TOP


 

   Adjustable Hot Scoot Motor Mount and Support

                    motormtonly1.jpg (62304 bytes)                  motormtonly2.jpg (59131 bytes)

Made from 11 gauge steel, the EVdeals HS motor mount performs two functions missing in the rather inadequate stock Hot Scoot motor mount.  

1) By combining an integral motor housing support bracket with the belt tensioning mount system, this device eliminates the potentially dangerous motor flange failures noted in the Tech Tip area of this site.

2) The EVdeals HS motor mount also provides a quick and accurate means of adjusting drive belt tension and motor alignment. As anyone who's tried adjusting the Hot Scoot belt tension knows, the process can be difficult and often results in the belt being too tight or loose. Fine adjustment of belt tension is nearly impossible. The EVdeals HS motor mount  system allows one hand micro-adjustment of tension using a single adjusting bolt. Simply loosen the motor mount bolts, tension the belt with the adjusting bolt, and re-tighten. The following pictures show the mount installed on a Hot Scoot motor.

motormtbench2.jpg (54692 bytes)        motormtbench3.jpg (63087 bytes)      motormtbench1.jpg (59344 bytes)  

As a bonus, all three chassis mounting bolts are easily accessible with common open end wrenches! The difficult to reach motor attachment bolts NEVER need to loosened in order to make tension adjustments! An installed system is shown below.

morormttop.jpg (61890 bytes)     motormtadj.jpg (48145 bytes)    motormtsupport2.jpg (48885 bytes)  

The EVdeals HS motor mount  is now available. Go to Parts and Accessories  

BACK TO TOP


 USPD Heat Sink Assembly for MAC      

This .082" aluminum heat sink assembly adds about 60 square inches of 
radiator surface to your MAC "silver can" motor at the interface between
the motor and gear housing. The added heat dissipation may make the
difference between a thermal "shut down" and getting to the top of that
long hill on a hot day! 

FinsOutside.jpg (81540 bytes)  FinsTop.jpg (58169 bytes)  FinsInside.jpg (84383 bytes)         

Installs in less than 5 minutes. Just remove the three bolts holding the
motor to the mounting plate, remove the existing metal gasket, smear
some thermal paste (supplied) on the heat sink, and reassemble.



Upgrade Old Currie and Lashout Bike Drives
 

NEW! Replace the stock clutch bearing and sprocket with a more rugged 5/8"  system. 100% greater torque handling ability for older USPD Currie and all Lashout drives! 70% increase in clutch bearing strength for all newer Currie drives!  Eliminates clutch bearing failure common in  Currie and Lashout bikes. Includes custom made and hardened steel drive shaft, 5/8" roller bearing clutch, thrust washers, & modified sprocket. Either send me your drive assembly for modification, or do it yourself! Call or write for details.
click to enlarge
(kit)
$79


See other EVdeals custom Currie products in the Parts and Accessories section! 

 

BACK TO TOP   

                                                                      <PLACE ORDER HERE>

[Home]  [Electric Scooters]  [Electric Bikes]  [Power Kits]
[Parts & Accessories]  [Dynamometer Tests]

 

 

 

 

 

 

 

 

 


 

Hit Counter