EVdeals Policies
Battery Tests
Dynamometer Tests
FAQs
Tech
Tips
Performance
Testing
Kit
Instructions
Eye
Candy
Yard Sale
Plans & Projects
Bob the Blob in Safety
First
(brief you-tube video)
Join
the Yahoo electric scooter e-mail group FREE!
Click HERE
Buying an electric
scooter, bike, or moped?
Free product evaluations
Click
ROAD TESTS
© 1999-2008 EVdeals.com
No part of this site may be reproduced or
transmitted in any form or by any means, electronic or mechanical,
including photo- copying, recording, or by any information storage and
retrieval system
without permission in writing from the publisher.
By appointment only!
Scott MacGregor
Plainville, MA 02762
Phone: (508) 695-3717
Fax: (508) 643-0233
| Switched Lashout brake lever set (2). Both levers have microswitches for controlling various things. The switches are combined so that either one will provide a "closed" condition at the output connector when its lever is pulled. Some have used this for LED brake system lights. |
 |
$39.00 |
| NEW
Battery cut-off switch. Large 3/8" brass stud terminals and nuts. Heavy brass feed-thru mounting holes. 2 keys. Rated 100A continuous, 1000A peak@12V, 50A continuous 500A peak @ 24V, 25A continuous 250A peak@48V. |
 |
$10.00 |
| DPDT 20A rocker switch. Parallel the 2 halves to create a 40A on/off main power switch. |
 |
$12.00 |
| DPST 20A toggle switch. Parallel the 2 halves to create a 40A on/off main power switch. |
 |
$10.00 |
| All metal charger port for Currie products and others. |
 |
$9.50 (metal)
|
| All metal XLR type charger cable connector for all Currie (and many other) products. (male) |
 |
$3.50 |
| 90 degree all metal XLR type charger cable connector for all Currie (and many other) products. (male) |
 |
$12.50 |
| All metal XLR type charger cable connector for all Currie (and many other) products. (female) |
 |
$12.50 |
| Polarized jumpers for Currie products and other uses. #10 soft, fine stranded wire. Molded polarized connector on each end. |
 |
$7.50 |
| Parallel auxiliary battery harness for adding battery capacity to your Currie (and certain other) scooters or bikes. Add a pair of 10A/Hr batteries in the basket and you've more than doubled your range! Specify scooter or bike harness. (scooter harness includes 6" battery jumper, and 36" battery extension) |
 |
Bike $24.95 Scooter $29.95 |
| Series battery harness for creating 48V battery system. For your Currie and Lashout (and certain other) scooters or bikes. Add a second battery pack on a rear rack and operate a Super BMC 48V motor system. With this harness you can charge your 48V system with a standard 24V charger! Retains all charger, pilot light, output, and on/off switch functions. Specify scooter or bike harness. (scooter harness includes 6" battery jumper, and 36" battery extension) |
 |
$24.95 Scooter $29.95 |
| 40 Amp blade fuse. Fits all Currie scooters and bikes. |
 |
2.00 |
|
NEW! LED "fuel gauge" measures your battery voltage to a few 10ths of a volt! Provides an indication of remaining battery power. Mounting posts and brass screws included. Simple 2 wire hookup. Instructions. Available in 24, 36, and 48 volt versions. YOU supply the housing and mounting method. OR You can also get any of the circuits pre-installed in a housing and ready to mount!  Attach to down-tube using double sided tape, plug into charger port, and monitor the battery condition of your bike or scooter to help prevent battery damage! |
|
$19.00 24V ($34 in case) |
 36V, 7 LED 2" x 7/8" x 2" |
$27.00 36V ($42 in case) |
|
|
48V, 7 LED 2" x 7/8" x 2" |
NEW! $29.00 48V ($44 in case) |
| Thumb Throttle with Cable and Connector (5K) fits all Currie, Lashout, and Electrec products. |
 |
$44.50 |
| Magura Twist Throttle. 63" cable and
pre-installed Molex connector.
This is Plug-n-Play for all Currie, Lashout, and Electrec products! (5K)
|
 |
$54.95 Matching left grip for above |